Log On / Register
Items: 0 Total: £0.00
Shopfront Contact Us Concrete Repair Site - Home
Search for:
For FREE Expert Advice
or Assistance Call Any of Our Offices
and Our Concrete Repair & Protection
Specialists will be Pleased to Help

Scotland : 01506 657996
Newcastle : 0191 419 2530
Chorley : 01257 266696
Sika
Sika are one of the world's largest manufacturers of specialist construction chemical products and the largest global manufacturer of Concrete Repair and Protection systems. Sika pioneered the development of the first complete concrete repair and protection system more than 30 years ago in the UK, and was the first to gain Agrement Approval for the full system approach in 1986. With extensive R&D plus state-of-the-art Production Facilites in the UK and Europe, Sika has remaned at the forefront of Concrete Repair and Protection technology including additional ancillary systems that are frequently required on refurbishment projects. These include: crack repair and Injection systems, Corrosion inhibitors, Resin anchors and fixings, elastic joint sealants and crack-bridging protective coatings.

Sika also produce systems for special applications that demand additional performance requirements such as chemical resistance and contact with potable water (DWI approved for contact with drinking water or foodstuffs - also safe in contact with aquatic life once cured). Sika produce cement based repair mortars and epoxy resin systems.

STAE1
SikaTop-Armatec-110-EpoCem

SikaTop-Armatec-110-EpoCem is a unique product which is an epoxy resin modified, cement based, 3-component material that also includes corrosion inhibitors. It is designed to be used as both an exposed steel reinforcement primer and as a bonding bridge primer for subsequently applied cement based repair mortars.

SikaTop-Armatec-110-EpoCem meets the requirements of European Standard EN 1504-7 and is tested and approved for the control of anodic areas in acordance with EN 1504-9, Principle 11, Method 11.1

SikaTop-Armatec-110-EpoCem provides additional corrosion protection for the steel reinforcement and increases the bond of repair mortars through increased wetting and contact on the bondline at the interface. SikaTop-Armatec-110-EpoCem also has a long pot life, is easy to mix and can be brush or spray applied. It is specifically tested and approved for application under dynamic load conditions,.

As a result the product has greatly extended open times when compared with cement-only based bonding bridge primers, and unlike pure epoxy resin bonding bridge primers, it is vapour permeable and behaves as an integral part of the concrete structure. Additionally SikaTop-Armatec-110-EpoCem has high resistance to water and chloride penetration and a high shear strength.

Color
Pack Size / Price
Quantity :
SMT610SMT610SMT610
Sika MonoTop 610

Sika MonoTop-610 is a one component, polymer modified cement based, steel reinfircement primer and a bonding bridge primer for MonoTop concrete repair mortars. Sika MonoTop-610 also contains added corrosion inhibitors and is designed to be used to provide additional corrosion protection to steel reinforcement and to bond Sika MonoTop concrete repair mortars to existing concrete structures. It is particulalry useful in areas of low concrete cover and in the presence of chlorides.

Sika MonoTop-610 is supplied as a pre-batched powder that only requires mixing with water. The mixed consistency can be adjusted to suit the type and method of application, which can be by brush or spray. Sika MonoTop-610 is approved as being suitable for drinking water contact as part of the Sika MonoTop concrete repair and protection system.

Color
Pack Size / Price
Quantity :
SAT615SAT615
Sika MonoTop-615 Repair Mortar

Sika MonoTop-615 is a one component, polymer modified, cement based, high build repair and reprofiling mortar, meeting the requirements of Class R3 of European Standard EN 1504-3. It is designed to be used for repairing all types of structures, with overhead and vertical repairs by hand or spray application.

Sika MonoTop-615 can be used internally as well as externally when a 35MPa strength is acceptable as an alternative to structural Class R1 & R2 mortars, where the high-build and ease of application can be a distinct advantage.

Sika MonoTop-615 is pre-batched and pre-bagged for quality control and it is only necessary to add water on site. The material can be sprayed by the wet-spray method and its cohesive nature and high build properties also mean that there is much lower wastage and therefore cost-savings over traditional cement based repair mortars.

Color
Pack Size / Price
Quantity :
SMT620SMT620SMT620
Sika MonoTop-620 Levelling Mortar

Sika MonoTop-620 is a one component, polymer modified, cement based concrete levelling mortar, which is designed for use as a a thin layer render or concrete pore sealer/levelling mortar/smoothing coat /fairing coat - particularly in concrete restoration and repair works. Sika MonoTop-620 is part of the Sika MonoTop concrete repair sytem and conforms to the requirements of European Standard EN 1504 Part 2

Sika MonoTop-620 can also be used to repair minor surface defects in concrete structures and it also provides additional surface protection against aggressive atmospheric influences such as carbonation and moisture or chloride ingress. It is frequently used in new and existing structures to repair honeycombed areas of the concrete finish.

This levelling mortar is easy to use as it is pre-bagged for quality control, has no solvent or VOC's so it can be used internally as well as externally, mixing is easy - just add water. The mixed material can then be applied by hand / trowel or it can be sprayed by the 'wet-spray' method.

When cured Sika MonoTop-620 forms an ideal substrate for the aplication of Sikagard protective coatings. 

Color
Pack Size / Price
Quantity :
SMA612SMA612
Sika MonoTop-612 Repair Mortar

Sika MonoTop-612 is a one component, polymer modified, cement-based, repair mortar / microconcrete, containing silica fume and meeting the requirements of Class R4 of European Standard EN 1504-3. it is primarily designed for spray application by the wet spray process, but it can also be easily hand applied in smaller areas where this is more practicable.

Sika MonoTop-612 can be used for repairing all types of structures and for horizontal, vertical and overhead repairs. It is therefore useable in place of a whole range of repair mortars including EN 1504-3 Class R1, R2 & R3 mortars - Therefore Sika MonoTop-612 can have considerable logistics advantages and provide cost savings on many projects with variable types, sizes and locations of concrete repair requirements - As only this one repair mortar is required.

Sika MonoTop-612 is pre-bagged for Quality Control, water is added in the wet spray pump or in the mixing vessel for hand application. It is easy to mix and apply with an adjustable consistency to suit each specific application. The material then cures quickly allowing overcoating with Sika levelling mortars or protective coatings without extended delays. Sika MonoTop-612 has low shrinkage, low permeability, good mechanical properties and strength correlation. Sika MonoTop-612 is tested and approved as being suitable for use in contact with drinking water (DWI Approved).

Color
Pack Size / Price
Quantity :
ST121ST121
SikaTop-121

SikaTop-121 is a two component, polymer modified, cement based, bonding bridge and waterproof mortar comprising of a liquid polymer incorporating admixtures and a special cement based powder mix.

SikaTop-121 is designed as a multi-pupose product with its main uses being as a bonding bridge primer for SikaTop repair mortars, a concrete repair smoothing coat/levelling mortar, a waterproof and watertight tile adhesive and as a waterproof tanking layer for lift pits and tanks etc. against ground water ingress into them and equally for water tanks, pools, etc, against leakage out of them. As a waterproofing material SikaTop-121 is normally applied on the positive pressure side in contact with the water, inorder to minimise water ingress into the structure.

SikaTop-121 is totally pre-batched for Quality Control and no additional water is required and should not be added on site.

SikaTop-121 is part of the SikaTop Concrete Repair System, it is BBA approved and also DWI Approved for use in contact with drinking water.

Color
Pack Size / Price
Quantity :
ST122ST122
SikaTop-122 Repair Mortar

SikaTop-122 Repair Mortar is a two component, polymer modified, cement based, fibre reinforced, waterproof, concrete repair mortar. It is designed for repairing all types of concrete structures including structural repairs to vertical and horizontal surfaces, including floor repairs.

SikaTop-122 Repair Mortar is supplies as a complete and totally pre-batched unit for maximum Quality Control, there are no other materials to be added on site - not even water. The powder component is placed in a compulsory mixer (crete-angle type), or in a mixing vessel with helical mixing paddles on an electric drill mixer, and then all of the liquid component is added slowly whilst mixing continuously.

SikaTop-122 Repair Mortar is used for hand applied repairs that are placed 'wet on wet' into the Bonding Bridge coat (i.e. SikaTop 121) The SikaTop-122 Repair Mortar is widely used for concrete repairs throughout the Water Industry and is DWI Approved for contact with Potable (Drinking) Water.

Color
Pack Size / Price
Quantity :
SIMT614SIMT614SIMT614
Sika-MonoTop-614F Flowable Repair Mortar

Sika® MonoTop-614F is a cement based, one component flowable repair mortar (High Flow) containing shrinkage compensators and high range water-reducing agents, meeting the requirements of Class R4 of BS EN 1504-3. It is designed for flow application into horizontal areas of repair, or shuttered / formwork surrounded repair to structural concrete. plus for forming crane rails and machine bases as a micro-concrete in a structural grouting operation up to 200mm thick.

Sika® MonoTop-614F is supplied pre-bagged with only water to be added on site to achieve the desired consistency for pumping or pouring into place without additional compaction necessarily being required.

Sika® MonoTop-614F has an adjustable consistency and so is easy to pump or pour, it is shrinkage compensated, forming an excellent and highly durable bond to the parent concrete.

Color
Pack Size / Price
Quantity :
SRRM
Sika-Rapid-Repair-Mortar

Sika Rapid Repair Mortar is a one component, fast setting, cement based concrete repair mortar. which meets the requirements of Class R4 of European Standard EN 1504-3. It is designed to be used for concrete repairs on all types of structure requiring a Class R4 Repair Mortar for easy hand application and trowel finishing followed by rapid gain of strength and fast setting to a structural level,

Sika Rapid Repair Mortar is normally used for horizontal and vertical repairs including trafficked floor slabs and car park decks for example. 

As an R$ Repair Mortar it can also be used everywhere that R1, R2 or R3 Mortars are specified if this is easier and more cost effective logistically for example.

Sika Rapid Repair Mortar is supplied pre-bagged for Quality Control, it is only necessary to add water on site. The material has a rapid gain of strength to a good structural level and typically at 20C is as follows: 2 hrs ~ 10 N/mm2 1 day ~ 50 N/mm2 7 days ~ 60 N/mm2 28 days ~ 70 N/mm2 

Color
Pack Size / Price
Quantity :
SG700ASG700A
Sikagard-700S Aquastop

Sikagard-700S Aquastop is a highly penetrative, solvented, Siloxane resin based, one part, hydrophobic water repellent impregnation for absorbent cement based substrates. It penetrates well into the open pores of the substrate, providing a durable water repellency, while still allowing water vapour diffusion in both directions.

Sikagard-700S is used as a water repellent and colourless protective surface treatment (i.e against water and chloride ingress), for absorbent exposed cementitious materials such as concrete,  Cement render, tiles, fibre cement panels, brickwork, natural stone etc.

Sikagard-700S penetrates into the surface and lines the pores and capillaries, which greatly reduces capillary water absorption. This results in the surface water repellency with continued water vapour diffusibility. As a result this improves resistance to frost and de-icing salts, reduces efflorescence and other staining, reduces dirt pick-up and improves thermal insulation.

Sikagard-700S can be overcoated with water dispersed protective coatings such as Sikagard Elastocolor 675W and 550W for increased resistance to carbonation, decoration and crack-bridging properties respectively.

Sikagard-700S will provide far greater durability and resistance than conventional silicone based treatments and does usually change the appearance of the substrate - except in wet weather obviously when the lack of water penetration means that the surfaces will not darken.

Application is by brush, roller or traditional low spray techniques. 

Color
Pack Size / Price
Quantity :
SG702WSG702WSG702W
Sikagard-702W Aquaphobe

Sikagard-702W Aquaphobe is a highly effective, solvent-free and water dispersed, Siloxane resin based concentrate that is diluted with clean water to produce a cost effective hydrophobic impregnation. This is designed to pentrate into the substrate and add water repellancy to exposed concrete and cement based surfaces.

Sikagard-702W Aquaphobe is used as a pentrative water proofing impregnation for mineral substrates including concrete and cementitious rendering, natural and reconstructed stone, aerated concrete, brickwork etc. against driving rain and water ingress.

Sikagard-702W Aquaphobe reduces capillary water absorption and the absorption of harmful substances dissolved in water; yet there is no change in water vapour permeability, allowing each way vapur diffusion to continue in accordance with good building physics.

The penetrative treatment of Sikagard-702W Aquaphobe is usually invisible, not modifying the substrate appearance. It greatly improves resistance to dirt pick up and reduces fungi, algae and lichen growths.

Sikagard-702W Aquaphobe is highly cost effective because it is diluted from between 1:4 to 1:9 before use, according to the density of the substrate, plus the performance and durability required. Application is by brush, roller or traditional low pressure spray and is normally is carried out in 2 coats to ensure optimum penetration and absorption to give a highly durable and long lasting water repelling protection.



Color
Pack Size / Price
Quantity :
SG680SSG680SSG680SSG680S
Sikagard-680S

Sikagard-680S is a one part, solvent containing, clear or coloured protective coating, based on methacrylic resins resistant to weathering, alkalis and ageing. It is designed for use on mineral substrates including concrete and other cementitious surfaces to protect the concrete against aggressive atmospheric influences such as carbonation and water / water-borne chloride ingress, plus it promotes a self-cleaning effect on the treated surfaces, but does not adversely influence the characteristic texture of the concrete.

Sikagard-680S complies with the requirements of EN 1504-2 as protective waterproof, anti-carbonation coating for concrete surfaces.

Sikagard-680S Clear Glaze is a colourless grade of the material drying to a gloss finished coat,which is designed as a protective coating for exposed aggregate concrete surfaces- Please refer and order Sikagard-680S Clear Glaze from the next seprate Product entry below.

Sikagard-680S coloured finishes dry to a matt finish, and are available in a wide range of colour shades.

Sikagard-680S is suitable for: - Protection against water ingress in accordance with Principle 1, Method 1.3 of European Standard EN 1504-9. - Moisture control in accordance with Principle 2, Method 2.3 of European Standard EN 1504-9. - Increasing the resistivity in accordance with Principle 8, Method 8.3 of European Standard EN 1504-9.

Sikagard-680S is solvent containing and so is suitable for application on damp surfaces and is very quickly rain resistant after application to the concrete surface.

Sikagard-680S has very high diffusion resistance against carbon dioxide and therefore can considerably reduce the rate and depth of carbonation of the concrete - giving a durable and longer lasting finish.

The Standard (Group 1) Colours available are shown on the colour card below - other colours i.e in almost any RAL or BS 4800 Colour Shade are available on request - Additional costs and minimum quantities may apply. Please call any of our offices to discuss your requirements. 

Color
Pack Size / Price
Quantity :
STS107STS107STS107
SikaTop Seal-107
SikaTop Seal-107 is a two part, polymer modified, cement based, waterproof levelling mortar for concrete refurbishment and a slurry coating for waterproofing and tanking works. It is totally pre-batched for Quality Control and consists of a liquid polymer with additional admixtures together with a special powder mix of blended cement, aggregates and other additives.

SikaTop Seal-107 is used for the protection of concrete structures against the effects of de-icing salts and freeze-thaw attack, plus pore / blowhole filling / sealing fine “hairline” cracks in concrete structures (not subject to movement)as a levelling mortar during concrete repair and protection works.

SikaTop Seal-107 is also used for the rigid waterproofing of basement walls in both new construction and refurbishment through both internal and external application for the waterproofing and damp-proofing of concrete, cement rendering, brickwork and blockwork structures.

In a combination of both of these applications, SikaTop Seal-107 is used as the 'industry standard' for the refurbishment and waterproofing of concrete surfaces in reservoirs and other drinking storage tanks subject to positive water pressure' (DWI Approved for Potable / Drinking water contact).

SikaTop Seal-107 is easy to apply by brush or trowel, but can also be wet spray applied and trowel finished. On exposed concrete surfaces SikaTop Seal-107 provides significant protection against carbonation and water ingress and can be overpainted with Sikagard protective coatings for additional protection or decorative purposes.

 

Color
Quantity :
SG675WESG675WESG675WESG675WESG675WE
Sikagard 675W Elastocolor
Sikagard-675W ElastoColor is a one part, plasto-elastic, water dispersed, coating based on styrene acrylate resin for the protection and enhancement of fairfaced concrete. It complies with the requirements of European Standard EN 1504-2 and is used for the protection and enhancement of concrete structures (normal and lightweight concrete), particularly for exposed concrete surfaces with a risk of hairline surface cracking.

Sikagard-675W ElastoColor is used as a componment of concrete repair and protection systems as an elastic protective coating on Sika levelling / smoothing mortars; it can also be used to refresh and upgrade by overcoating, existing soundly adhering coatings.

In accordance with European Standards EN 1504, Sikagard-675W ElastoColor is suitable for: - Protection against water ingress in accordance with Principle 1, Method 1.3 of EN 1504-9 - Moisture control in accordance with Principle 2, Method 2.2 of EN 1504-9 - Increasing the resistivity in accordance with Principle 8, Method 8.2 of EN 1504-9

Sikagard-675W ElastoColor is water vapour permeable, has very good resistance against weathering and ageing, very good chalking resistance and high covering power (good opacity). Plus of course it prevents water ingress and has high diffusion resistance to CO2 (carbon dioxide).

Sikagard-675W ElastoColor is an excelent choice of protective coating for many buldings and exposed concrete suraces, it is easily applied, as delivered to site, by brush, roller or spray. The Standard (Group 1) Colours available are shown on the colour card below - other colours i.e in almost any RAL or BS 4800 Colour Shade are available on request - Additional costs and minimum quantities may apply. Please call any of our offices to discuss your requirements.

Color
Pack Size / Price
Quantity :
SG550WESG550WESG550WE
Sikagard 550W Elastic

Sikagard-550W Elastic is a one component, water dispersed, plasto-elastic coating based on UV-curing acrylic resin with excellent crack-bridging properties even at temperatures considerably below 0°C.

Sikagard-550W Elastic complies with the requirements of European Standards EN 1504-2 as a protective coating. It is used for the protection and enhancement of all types of concrete structures (normal and lightweight concrete), particularly exposed outdoor concrete surfaces with a risk of cracking.

Sikagard-550W Elastic is used as a component of concrete repair and protection systems as an elastic protective coating on Sika levelling / smoothing mortars. It is suitable for: - Protection against ingress in accordance with Principle 1, Method 1.3 of EN 1504-9. - Moisture control in accordance with Principle 2, Method 2.2 of EN 1504-9. - Increasing the resistivity in accordance with Principle 8, Method 8.2 of EN 1504-9

Sikagard-550W Elastic is crack-bridging even at low temperatures (-20°C), has high diffusion resistance against Carbon dioxide (CO2), reducing the rate of carbonation, is water vapour permeable and has very good resistance against weathering and ageing.

Due to the fact that it is water dispersed and solvent-free, plus UV resistant, it is also environmentally friendly and has a greatly reduced tendency to dirt pick up and contamination, due to its self-cleaning effect.

The Standard (Group 1) Colours available are shown on the colour card below - other colours i.e in almost any RAL or BS 4800 Colour Shade are available on request - Additional costs and minimum quantities may apply. Please call any of our offices to discuss your requirements.

Color
Pack Size / Price
Quantity :
Sikagard-552W Aquaprimer

Sikagard-552W Aquaprimer is one component, water dispersed, acrylic resin based, adhesion promoting primer for water dispersed polymer paint coatings - such as Sikagard 550W Elastic. It is part of a system that complies with the requirements of EN 1504-2 as protective coating for concrete structures.

Sikagard-552W Aquaprimer is uitable for use to prime concrete, cement renders and other mineral substrates including Sika Levelling Mortars etc. It can also be used as a vapour permeable primer on firmly adhering existing water based coatings.

Sikagard®-552 W Aquaprimer is water dispersed, solvent-free and environmentally friendly. 

Color
Pack Size / Price
Quantity :
SFG903SFG903SFG903SFG903
Sika FerroGard-903+

Sika FerroGard-903+ is a surface applied mixed corrosion inhibitor, designed for use as an impregnation of steel reinforced concrete and is an improved formulation of the original Sika FerroGard-903. Sika FerroGard-903+ is based on organic compounds that penetrate the concrete and form a protective monomolecular layer on the surface of the reinforcing steel.

Protection with Sika FerroGard-903+ both delays the start of corrosion and reduces the corrosion rate. Corrosion protection with Sika FerroGard-903+ therefore increases the service and maintenance life cycles by up to 15 years when used as a part of a complete Sika Concrete Repair and Protection System, prior to overcoating with a Sika Protective coating such as Sikagard 550W Elastic.

Sika FerroGard-903+ is used for the corrosion protection of many different types of steel reinforced concrete structures, where the reinforcing steel is corroding, or is at risk from corrosion due to the effects of carbonation or chloride contaminated concrete

Sika Ferrogard-903+ is particulalry suitable for extending the service life of fair-faced concrete surfaces on important buildings and structures with difficult or expensive access.

Sika Ferrogard-903+ complies with Principle 11 of European Standard EN 1504-9, Method 11.3 Applying inhibitor to the concrete.

Sika Ferrogard-903+ does not change the appearance of the concrete structure, it does not alter the water vapour diffusion properties of concrete and provides significant additional long term protection and durability. It can be applied to the surface of existing repairs and to surrounding areas to prevent the development of incipient anodes as it protects both the cathodic (Principle 9) and anodic (Principle 11) zones of the steel reinforcement surfaces.

Color
Pack Size / Price
Quantity :
SFC
Sikaflex Construction

Sikaflex-Construction is a one part, moisture curing, elastic joint sealant based on polyurethane resin. It is designed for outdoor joint sealing applications as a general purpose elastic construction sealant for sealing joints in many types of buildings including movement joints in facades and construction/isolation joints around windows and doors, cladding panels etc. with good adhesion to concrete, brick, wood, metals and PVC profiles etc.

Sikaflex-Construction has a joint movements capability of 25% in accordance with International Standard ISO 11600, Classification F 25 HM / F 20 LM and high tear resistance.

Sikaflex-Construction uses Sika's patented bubble-free curing system and has a very short cut-off with minimal 'stringing' to avoid messy application and contamination of adjacent surfaces, folowed quickly by a tack-free surface. An excellent all round construction joint sealant and compatible for use with Sika concrete repair and protection systems.

Sikaflex-Construction is supplied in 600ml / cc foil sausages for application in standard bulk sealant guns (barrelled). We normally supply Sikaflex Construction in boxes of 20 sausages for ease of packaging and transport. 

Color
Pack Size / Price
Quantity :
SFP2HP
Sikaflex-Pro 2 HP

Sikaflex PRO-2 HP is a one part, moisture curing, low modulus, elastic joint sealant based on polyurethane resin that is designed for the durable sealing of many different conctruction movement and connection joints for indoor and outdoor applications in many types of buildings and other structures. It has a joint movement capability of 25% in accordance with International Standard ISO 11600, F 25 LM.

Sikaflex PRO-2 HP is suitable for the permanently elastic sealing of movement joints in concrete facades and parapets for example, plus connection joints such as those around windows and doors, cladding panels and precast units, as well as similar types of joint in wooden and metal structures.

Sikaflex PRO-2 HP is easy to apply and has low stringing to avoid messy application and contamination of adjacent surfaces, plys it is easy to smooth and incorporates Sika's patented bubble-free curing system.

Sikaflex PRO-2 HP imparts very low stress to the joint arrises due to its integral stress relieving properties and cures to form a durable seal with high tear strength.

Sikaflex Pro-2 HP is supplied in 300 ml plastic cartridges for use in a standard sealant gun, and 600 ml foil sausages for use in a standard barrelled bulk sealant gun (both also available in the 'Tools and Accessories' section of this website shop). For ease of packaging and secure transport we normally supply Sikaflex Pro-2 HP in boxes containing 12 x 300 ml Cartridges and 20 x 600 ml Sausages.

Color
Pack Size / Price
Quantity :
SFPR3SFPR3
Sikaflex Pro-3

Sikaflex Pro-3 is a one part, moisture curing, elastic joint sealant with high chemical and mechanical resistance for multi-purpose horizontal floor and concrete slab joints in both indoor and outdoor applications. It is suitable for use in both pedestrian and vehicle trafficked areas such as car parking decks, industrial floors in warehouses and production areas including clean rooms and in the food industry, plus many different types of civil engineering structures.

Sikaflex Pro-3 is also specifically tested and approved for use in waste water and sewage treatment plants and tunnels. It is designed to accomodate joint movement up to 25% and uses Sika's patented bubble-free curing.

Testing and Approvals: Sikaflex Pro-3 conforms to European Standard EN 15651-4 class 25 HM for interior & exterior applications, including cold climate areas. Conforms to ISO 11600 F 25 HM. Sikaflex Pro-3 is tested according to the principals of DIBT for Waste Water Exposure. Sikaflex Pro-3 meets European Standard EMICODE EC1 PLUS R, Classed as havin very low emissions. Sikaflex Pro-3 has the ISEGA Certificate for foodstuff area usage. Sikaflex Pro-3 is DWI Approved for contact with Potable (Drinking) water. Sikaflex Pro-3 is CSM TVOC tested (ISO-6.8) to be biologically resistant, Class: Very good. Sikaflex Pro-3 is resistant to Diesel and Jet Fuel according to DIBT guidelines

Sikaflex Pro-3 is supplied in 600 ml / cc foil sausages for application in standard bulk sealant guns (barrelled). We normally supply Sikaflex Pro-3 in boxes of 20 sausages for ease of packaging and transport.

Color
Pack Size / Price
Quantity :
SD31CFN
Sikadur 31 CF Normal

Sikadur-31 CF Normal is a solvent-free, moisture tolerant, thixotropic, structural strength, two-part, epoxy resin based adhesive and repair mortar, designed for use at temperatures between +10°C and +30°C. It is designed for use as a structural adhesive and repair mortar for thin layer repairs normall up to around 10mm layer thickness, but can be used at up to 30mm with added sand aggregates.

Sikadur-31 CF Normal has excellent adhesion to suitable prepared concrete, cement render, natural stone, ceramics, brick and metals such as steel, cast iron and Aluminium, plus wood, many hard plastics and glass - This makes Sikadur-31 CF Normal a truly multi-purpose adhesive and repair mortar for countless construction applications. Generally no additional primer is required and the material is supplied totally prebatched for Quality Control and in different coloured components that ensures complete mixing when a uniform colour is achieved

Sikadur-31 CF Normal is particulalry ideal for making rapid hardening repairs to corners and edges, for surface holes and void filling, and particulalry useful for joint and crack arris / edge repairs in horizontal, vertical and overhead applications.

Sikadur-31 CF Normal is easy to mix and apply, can be used on dry and damp concrete surfaces; it is tThixotropic and non-sag, plus it hardens without shrinkage. It hardens rapidly to give high initial and ultimate mechanical strengths, good abrasion resistance, it is impermeable to liquids and water vapour, plus it has good chemical resistance.

Testing: Tested and approved in accordance with European Standard EN 1504 Part 4.

Color
Pack Size / Price
Quantity :
SD31GBR
Sikadur-31 GB Rapid

Sikadur-31 GB Rapid is a solvent-free, moisture tolerant, thixotropic, structural strength, two-part, epoxy resin based adhesive and repair mortar, designed for use at temperatures between +5°C and +20°C. It is designed for use as a structural adhesive and repair mortar for thin layer repairs normally up to around 10mm layer thickness, even vertically, but can also be used at up to 30mm horizontally with added sand aggregates.

Sikadur-31 GB Rapid has excellent adhesion to suitable prepared concrete, cement render, natural stone, ceramics, brick and metals such as steel, cast iron and Aluminium, plus wood, many hard plastics and glass - This makes Sikadur-31 GB Rapid a truly multi-purpose adhesive and repair mortar for countless construction applications. Generally no additional primer is required and the material is supplied totally prebatched for Quality Control and in different coloured components that ensures complete mixing when a uniform colour is achieved

Sikadur-31 GB Rapid is particulalry ideal for making rapid hardening repairs to corners and edges, for surface holes and void filling, and particulalry useful for joint and crack arris / edge repairs in horizontal, vertical and overhead applications.

Sikadur-31 GB Rapid is easy to mix and apply, can be used on dry and damp concrete surfaces; it is thixotropic and non-sag, plus it hardens without shrinkage. It hardens rapidly to give high initial and ultimate mechanical strengths, good abrasion resistance, it is impermeable to liquids and water vapour, plus it has good chemical resistance.

Testing: Tested and approved in accordance with European Standard EN 1504 Part 4.

Color
Pack Size / Price
Quantity :
SD31DW
Sikadur-31 DW

Sikadur-31 DW is a thixotropic, two part adhesive and repair mortar, based on epoxy resins and special fillers which has been specially formulated to meet the requirements for use in contact with drinking water.

Sikadur-31 DW is a solvent-free, moisture tolerant, thixotropic, structural strength, two-part, epoxy resin based adhesive and repair mortar, designed for use at ambient and substrate temperatures between +10°C and +30°C. It is designed for use as a structural adhesive and repair mortar for thin layer repairs normally up to around 10mm layer thickness, even vertically, but can also be used at up to 30mm horizontally with added sand aggregates.

Sikadur-31 DW has excellent adhesion to suitable prepared concrete, cement render, natural stone, ceramics, brick and metals such as steel, cast iron and Aluminium, plus wood, many hard plastics and glass - This makes Sikadur-31 DW a truly multi-purpose adhesive and repair mortar for countless construction applications. Generally no additional primer is required and the material is supplied totally prebatched for Quality Control and in different coloured components that ensures complete mixing when a uniform colour is achieved

Sikadur-31 DW is particularly ideal for making rapid hardening repairs to corners and edges, for surface holes and void filling, and very useful for joint and crack arris / edge repairs in horizontal, vertical and overhead applications.

Sikadur-31 DW is easy to mix and apply, can be used on dry and damp concrete surfaces; it is thixotropic and non-sag, plus it hardens without shrinkage. It hardens rapidly to give high initial and ultimate mechanical strengths, good abrasion resistance, it is impermeable to liquids and water vapour, plus it has good chemical resistance.

Testing: Tested and approved in accordance with European Standard EN 1504 Part 4. WRAS, UK: Approval for use with Sikadur Combiflex SG, Reference RW/M5425, (17. 04. 2008) Test report M 103983 / M 104028 DWI Approval for use with Sikadur Combiflex SG jointing system, Reference DWI 56.4.94 (5.5.2011)

Color
Pack Size / Price
Quantity :
Sikagard-680S Clear Glaze

Sikagard-680S Clear Glaze is exactly as it says, a 'Clear Glaze' grade of Sikagard-680S Coloured. It is a one part, solvent containing, clear protective coating, based on methacrylic resins resistant to weathering, alkalis and ageing. It is designed for use on mineral substrates including concrete and other cementitious surfaces to protect the concrete against aggressive atmospheric influences such as carbonation and water / water-borne chloride ingress, plus it promotes a self-cleaning effect on the treated surfaces, but does not adversely influence the characteristic texture of the concrete.

Sikagard-680S complies with the requirements of EN 1504-2 as protective waterproof, anti-carbonation coating for concrete surfaces.

Sikagard-680S Clear Glaze is a colourless grade of the material drying to a gloss finished coat,which is designed as a protective coating for exposed aggregate concrete surfaces.

Sikagard-680S Clear Glaze is solvent containing and so is only foe external application and is suitable for application on slightly damp concrete surfaces, and is very quickly rain resistant.

Sikagard-680S has very high diffusion resistance against carbon dioxide and therefore can considerably reduce the rate and depth of carbonation of the concrete - giving a durable and longer lasting finish.

For coloured grades of the material please refer to the seperate Product Listing above.

Color
Pack Size / Price
Quantity :
SD41CFN
Sikadur 41 CF Normal

Sikadur-41 CF Normal is a thixotropic, three-part, epoxy resin based, concrete repair mortar. It consists of a combination of epoxy resin, hardener and specially graded aggregate fillers, and is designed for use at temperatures between +10°C and +30°C.

Sikadur-41 CF Normal is used to repair and bond concrete, stone, brick and other masonry, plus it will bond to metals, wood, some hard plastics and glass. The main use of Sikadur-41 CF Normal epoxy resin based mortar is for the rapid repair of damaged concrete surfaces such as floors, steps and around joint edges and arrises etc. It is also used to provide an abrasion and impact resistant wearing course, where frequent traffic or other activity will quickly damage concrete surfaces.

Sikadur-41 CF Normal is easy to mix and apply in thicknesses of up to 60mm in a single application by trowel, normally it does not require an additional priming coat, and can be used on damp substrates. It is thixotropic and non-sag in vertical and overhead applications, then it hardens quickly without any shrinkage.

When hardened Sikadur-41 CF Normal epoxy resin based mortar has high initial and ultimate mechanical strengths (approximately 50 Mpa in one day at 20°C) including good abrasion resistance and good chemical resistance.

Testing: Approved to European Standard EN 1504, Part 3.

Color
Pack Size / Price
Quantity :
SD41CFR
Sikadur-41 CF Rapid

Sikadur-41 CF Rapid is a thixotropic, three-part, epoxy resin based, concrete repair mortar. It consists of a combination of epoxy resin, hardener and specially graded aggregate fillers, and is designed for use at temperatures between +5°C and +20°C.

Sikadur-41 CF Rapid is used for rapid structural repair and bonding of concrete, stone, brick and other masonry, plus it will also bond to metals, wood, some hard plastics and glass. The main use of Sikadur-41 CF Rapid epoxy resin based mortar is for the rapid repair of damaged concrete surfaces such as floors, steps and around joint edges and arrises etc. It is also used to provide an abrasion and impact resistant wearing course, where frequent traffic or other activity will quickly damage concrete surfaces.

Sikadur-41 CF Rapid is easy to mix and apply in layers of up to 60mm in a single application, normally it does not require an additional priming coat, and can be used on damp substrates. It is thixotropic and non-sag in vertical and overhead applications, then it hardens quickly without any shrinkage.

When hardened Sikadur-41 CF Rapid epoxy resin based mortar has high initial and ultimate mechanical strengths (approximately 75 Mpa in a one day at 20°C), including good abrasion resistance and good chemical resistance.

Testing: Approved to European Standard EN 1504, Part 3.

Pack Size / Price
Quantity :
Sika Armorex L2 High Flow
Sika Armorex L2 High Flow is a one part, high flow, shrinkage compensated, high strength, rapid strength gaining, cementitious grout. It is designed for precision, high performance grouting underneath machine bases, structural steelwork stanchion bases, grouting around precast concrete units, fixing anchor bars and various different applications in concrete repair works.

Sika Armorex L2 High Flow can be used for grouting in layer thicknesses of between 10 and 100 mm, where it can achieve a strnght in excess of 40 Mpa in 24 hours Testing: Conforms to the UK Department of Transport Specification Clause 2601, 6th & 7th Editions

Color
Pack Size / Price
Quantity :
SG212
SikaGrout-212

SikaGrout-212 is a one part, flowable, shrinkage compensated, cementitious grout for multiple grouting applications in construction, including grouting under stanchion and machine baseplates and concrete repairs. Meets the requirements of Class R4 of BS EN 1504-3 & BS EN 1504-6.

SikaGrout-212 is pre-batched for quality control only water is added on site, where it is easy to mix and apply by pouring or it can be pumped for grouting thicknesses of between 10 and75 mm.

SikaGrout-212 has excellent flow properties, good rates of compressive strength gain, minimal shrinkage, plus it does not segregate or bleed.

SikaGrout-212 is compatible with Sika® FerroGard® corrosion inhibitors, overcoatable with Sika reprofiling/levelling mortars and coatings, plus has a fire rating and protection properties equivalent to good concrete.  

Color
Pack Size / Price
Quantity :
SAF1
Sika Anchorfix-1
Sika Anchorfix-1 is a solvent and styrene free, two part, polyester resin based anchoring adhesive grout. It is used as a multi-purpose, fast curing, anchoring adhesive for grouting and fixing steel rebars / reinforcing steel starter bars, anchor bolts and other special fastening systems.

Sika Anchorfix-1 is designed for use in concrete, masonry and natural stone substrates, it is easily applied using standard sealant guns, it can be used at low temperatures, has low odour and non-sag - even overhead, meaning it is also very low wastage.

Sika Anchorfix-1 cures rapidly (approximately 1 hour at 20 C), and it has a high load capacity (approximately 50 Mpa after full cure at 7 days). 

Color
Pack Size / Price
Quantity :
SAF2
Sika Anchorfix-2


Sika Anchorfix-2 is a high-performance, 2-part, resin anchoring adhesive grout that is solvent and styrene free, epoxy acrylate resin based. It is used as a fast curing anchoring adhesive for steel rebars / reinforcing steel bars, threaded rods and anchor nolts into concrete, masonry and natural stone substrates. Sika Anchorfix-2 is easy to apply with standard sealant guns, is low odour and non-sag so ideal for overhead applications as well.

Sika Anchorfix-2 is fast curing (approximately 60 minutes at 10 to 20 C)and has a high load capacity (approximately 60 Mpa). Testing: Meets European Technical Approval ETAG 001 Part 5 Option 7

Color
Pack Size / Price
Quantity :
SD33
Sikadur 33


Sikadur-33 is a high-performance, 2-part, epoxy resin based two part structural adhesive grout supplied in an easy to use cartridge. It is used as a structural adhesive for concrete repairs and fixing / anchoring applications such as the vertical and overhead repair of concrete corners and edges, hole and void filling, joint arrises and crack sealing(non moving), fixing and sealing fixtures and fittings or fastenings for handrails, railings, balustrades etc., plus fixing window and door frames.

Sikadur-33 can be used for fixing and grouting in concrete, natural stone, masonry and wood. It can be used on damp concrete, it is non-sag(including overhead), has a high load capacity (approximately 50 Mpa)and is fast curing with shrinkage-free hardening. Testing: Approval / Standards Testing according to EN 1504-4

Color
Pack Size / Price
Quantity :
SD42HEEGSD42HEEG
Sikadur-42 HE Epoxy Grout
Sikadur-42 HE Epoxy Grout is a three-component, high performance, high precision, moisture tolerant, epoxy resin grout. It is designed for use at temperatures between +5°C and +30ºC in applications such as the high-strength and precision grouting and fixing of base plates, machinery rail tracks, bridge bearings etc., plus the fixing of starter bars, anchors, fasteners, tie-rods, crash barrier posts, handrails and ballustrades etc.

Sikadur-42 HE Epoxy Grout provides high early strength and is fast curing, even at low temperatures. it is supplied in ready-to-mix, pre-batched units and is easy to mix and apply, non-shrink, plus is tolerant of damp substrates and humid environments.

When cured Sikadur-42 HE Epoxy Grout is corrosion and chemically resistant, high mechanical strengths and impact resistant, vibration resistant, a low coefficient of thermal expansion and good creep resistance Testing: Approval / Standards Testing according to EN 1504-6.

Color
Pack Size / Price
Quantity :
Copyright © NCC 2009
Created and Managed by Ekomate.com